返回顶部
NO:1
PET片材母粒
PET板材 高透光，长久耐候，无裂纹，无味，环保，阻燃，不易碎，不褪色，抵抗冲击强。可回收再利用; 优良的热塑特性; 良好的电绝缘特性。
PET sheet has high light transmission, long-term weatherability, no crack, tasteless.environmental protection, flame retardant，non-breakable, non-fading, strong impactresistance Can be recvcled: Excellent thermoplastic properties: Good electrica insulatiorcharacteristics.
参考配比:1:50-1:10(用户可根据要求自行调整)包 装: 25kg/袋，(可按客户需求予以订做)。储 存:存放于阴凉干燥处，忌爆晒，雨淋。Reference ratio: 1:50-1:10 (users can adjust themselves according to requirementsPacking: 25kg/bag (can be customized according to customer requirements).Storage: Store in a cool and dry place, avoid explosion and rain.
NO:2
双向拉伸膜BOPET母粒
PET专用色母粒的载体、染料、助剂等都经过严格筛选，无毒，无味，绿色环保，着色性强，性能稳定，无色点和色纹，具有良好的耐热及耐光稳定性
The carrier, dye and auxiliaries of PET special color masterbatch have been strictlscreened, which are non-toxic, tasteless, green, strong coloring property, stable performance.colorless spots and color lines, and have good heat resistance and light resistance.
1、车窗膜透光率可达90%以上，抗紫外线可达99%，红外线可达80%以上1. The light transmittance of the window film can reach over 90%, the ultraviolet resistancecan reach 99%,and the infrared resistance can reach over 80%
2、光学膜表面光滑，膜层之间的界面呈几何分割;膜层的折射率在界面上可以发生跃变，但在膜层内是连续的;可以是透明介质，也可以是吸收介质;可以是法向均匀
的，也可以是法向不均匀的
2. The surface of the optical film is smooth, and the interface between the films isgeometrically divided: The refractive index of the film can iump at the interface, but it iscontinuous in the film. lt can be a transparent medium or an absorbing medium; lt can benormaluniformornormalnon-uniform
3、包装膜3. Packaging film
类别 | 试验结论 |
| Item | TestingConclusion |
| 相溶性 Phase solubility | PET |
| 载体 Carrier | PET |
| 水含量 water content (%) | <0.2% |
| 耐迁移性 Migration resistance (Level) | 4-5 |
| 耐晒性 Light fastness (Level) | 6-7 |
| 耐温性 Temperature resistance(C) | 220 |
| 溶化温度 Melting temperature() | 120 |
| 熔融指数 MFI(g/10min)[2.16kg/190°C] | >20 |
| 添加量 Addition amount(%) | 6%-8% |
参考配比:1:50-1:10(用户可根据要求自行调整)
包 装:25kg/袋，(可按客户需求予以订做)。
储 存:存放于阴凉干燥处，忌爆晒，雨淋。
Reference ratio: 1:50-1:10 (users can adjust themselves according to requirements)
Packing: 25kg/bag (can be customized according to customer requirements).
Storage: Store in a cool and dry place, avoid explosion and rain.
NO:3
PET吹瓶母粒
PET色母料具有无毒、耐气候性好、抗化学药品稳定性好、电绝缘性能好、耐磨擦性好的特点，PET色母料可用于注塑、挤出、吹塑、涂覆、粘接、机加工、电镀、真空镀金属、印刷等工艺中。
PET color masterbatch has the characteristics of non-toxicity, good weather resistance.good chemical stability, good electricalinsulation performance and good wear resistance. PETcolor masterbatch can be used in injection molding, extrusion, blow molding, coating.oonding, machining, electroplating, vacuum metalplating, printing and other processes.
参考配比:1:50-1:10(用户可根据要求自行调整
包 装: 25kg/袋，(可按客户需求予以订做)。
储 存:存放于阴凉干燥处，忌爆晒，雨淋。
Reference ratio: 1:50-1:10 (users can adjust themselves according to requirements
Packing: 25kg/bag (can be customized according to customer requirements).
Storage: Store in a cool and dry place, avoid explosion and rain.
NO:4
PET 拉丝母粒
PET拉丝抗皱、保型、挺阔、美观，对热、光稳定性好，经洗耐穿，可与其他纤维混纺，年久不变黄。
PET drawing anti-wrinkle, shape-preserving, very wide, beautiful, heat, light stability.
washable and durable, can be blended with other fibers, does not turn yellow over time.
参考配比:1:50-1:10(用户可根据要求自行调整)
包 装:25kg/袋，(可按客户需求予以订做)。
储 存:存放于阴凉干燥处，忌爆晒，雨淋。
Reference ratio: 1:50-1:10 (users can adjust themselves according to requirements
Packing: 25kg/bag (can be customized according to customer requirements).
Storage: Store in a cool and dry place, avoid explosion and rain.
NO:5
注塑色母
本系列注塑专用色母粒具有色泽明亮，着色强度高、分散性好，浓度高，白度好，遮盖力强，价格合理等优点，耐迁移性和耐热性好等特点。此产品通过欧盟SGS公司环保检测认证合格。
This series of special masterbatch for injection molding has the advantages of bright colorhigh color strength, good dispersion, high concentration, good whiteness, strong hiding powerreasonable price, good migration resistance and heat resistance. This product has passed the EUSGS environmental protection testing certification.
技术指标Technical index
| 指标Index | 数值numericalvalue |
| 载体 Carrier | PP、PE |
| 色粉含量 Toner content | 35%-70% |
| 熔融指数 MFI(21.6KG/190°C) | 10-30g/min |
| 相溶性Intermiscibiliy | PP、PE |
添加比例Addition Percentage
根据客户对产品外观的需求，自行调整添加量，推荐添加2%~4%
Adjust the addition percentage according to customer requirements for products appearanceeffect.The recommend addition percentage is 2%~4%
包装&储存Package and Storage
塑料编织袋包装，每袋净重25Kg,请存放在干燥处
PP woven bagN.W 25Kq/bag.Please store in dry place
NO:6
管材专用色母
本系列用于PE给水管、排水管及燃气管的应用。环保、无毒、无味，产品表面光滑亮泽和实色颜色稳定，韧性好，分散性好不会出现色点和色纹等现象，既降低成本，节约添加剂，又减少厂房场地污染。此产品通过欧盟SGS公司环保检测认证合格。
This series is used for PE water supply pipe, drain pipe and gas pipe application. lt isenvironmentally friendly, non-toxic, and tasteless. The product surface is smooth and shiny and thecolor is stable. lt has good toughness and good dispersion without color spots and color streaks. ltreduces costs, saves additives and reduces plant site pollution. This product has passed the EU SGSenvironmental protection testing certification.
技术指标Technical index
| 项目Project | 指标Index |
| 外观Surface | 表面光洁，大小均匀，色泽一致 |
| 载体 Carrier | PE、PP、EVA |
| 色粉含量Toner content | 10%-55% |
| 熔融指数MFI(21.6KG/190°C) | 1-40g/10min |
添加比例Addition Percentage
根据客户对产品外观的需求，自行调整添加量，推荐添加1%~2%
Adjust the addition percentage according to customer requirements for products appearanceeffect.The recommend addition percentage is 1%~2%
包装&储存Package and Storage
塑料编织袋包装，每袋净重25Kq,请存放在干燥处
PP woven bagN.W 25Kq/bag.Please store in dry place
NO:7
家电注塑色母
本系列为洗衣机、空调外壳等注塑件专用色母粒，有着极佳熔融混炼分散性和颜色稳定性，减少塑料受热降解，并且有着最高的机械强度保持率。
This series is a special masterbatch for injection molding parts such as washing machine andair conditioner shell. lt has excellent melt mixing dispersion and color stability, reduces thermadearadation of plastics, and has the highest mechanica strenath retention rate. This product haspassed the EU SGS environmental protection testing certification.
技术指标Technicalindex
| 指标Index | 数值numericalvalue |
| 载体 Carrier | PP、ABS、HIPS |
| 色粉含量 Toner content | 30%-70% |
| 熔融指数 MFI(21.6KG/190°C) | 10-30g/min |
| 相溶性Intermiscibiliy | PP、ABS、HIPS |
添加比例Addition Percentage
根据客户对产品外观的需求，自行调整添加量，推荐添加2%~4%
Adjust the addition percentage according to customer requirements for products appearanceeffect.The recommend addition percentage is 2%~4%
包装&储存Package and Storage
塑料编织袋包装，每袋净重25Kq,请存放在干燥处PP woven bag,NW 25Kg/bag.Please store in dry place
NO:8
吹膜、拉丝色母
本系列吹膜、拉丝专用色母粒，选用优质颜料，保持良好的化学稳定性，分散性好、遮盖力强，减少受热降解，此产品通过欧盟SGS公司环保检测认证合格。
This series of color masterbatches for blown fim and wire drawing use high-quality pigmentsto maintain good chemical stability, good dispersibility, strong hiding power, and reduce thermaldearadation, This product has passed the EU SGS environmental protection inspection certification.
技术指标Technicalindex
| 指标Index | 数值numericalvalue |
| 载体 Carrier | PP、PE、EVA |
| 色粉含量 Toner content | 20%-70% |
| 熔融指数 MFI(21.6KG/190°C) | 10-30g/min |
| 相溶性Intermiscibiliy | PP、PE |
添加比例Addition Percentage
根据客户对产品外观的需求，自行调整添加量，推荐添加2%~6%
Adjust the addition percentage according to customer requirements for products appearanceeffect.The recommend addition percentage is 2%~6%
包装&储存Package and Storage
塑料编织袋包装，每袋净重25Kq,请存放在干燥处
PP woven bagNW 25Kq/bag.Please store in dry place
NO:9
线缆色母
本系列用于通讯缆、数据缆(网络线)、电子线、汽车线，以及光纤光缆、电力电缆等领域。适用于PVC、EVA、低烟无卤等材料，中高浓度，低添加比，此产品通过欧盟SGS公司环保检测认证合格。PEThis series is used in communication cables, data cables (network cables), electronic cablesautomotive cables, optical fiber cables, power cables and other fields. Suitable for PE, PVC,EVAow-smoke and halogen-free materials. With high concentration and low addition ratio, thisproduct has passed the EU SGS environmental protection testing certification.
技术指标Technical index
| 指标Index | 数值numericalvalue |
| 载体 Carrier | PP、PE、EVA |
| 色粉含量 Toner content | 20%-55% |
| 熔融指数 MFI(21.6KG/190°C) | 10-30g/min |
| 相溶性Intermiscibiliy | PP、PE、EVA |
添加比例Addition Percentage
根据客户对产品外观的需求，自行调整添加量，推荐添加1%~2%
Adjust the addition percentage according to customer requirements for products appearanceeffect.The recommend addition percentage is 1%~2%
包装&储存Package and Storage
塑料编织袋包装，每袋净重25Kg,请存放在干燥处PP woven bag,N.W 25Kg/bag.Please store in dry place
NO:10
管材、管件专用色母
本系列母粒为PP-R、MPP管材、管件专用色母粒，本产品采用进口的杜邦白粉，PP-R专用树脂做载产品达到饮用水的级别要求。选用优质颜料，保持良好的化学稳定性，分散性好、遮盖力强，减少受热降体解，环保符合SGS等法规。
This series of masterbatches are special masterbatches for PP-R, MPP pipes and fittings. Thisproduct uses imported DuPont titanium dioxide and PP-R special resin as the carrier. The productreaches the level of drinking water. lt requires high-quality pigments to maintain good chemistrystability, good dispersion and covering force, it reduces the thermal degradation, and theenvironmental protection standard is in line with SGS and other regulations.
技术指标Technical index
| 指标Index | 数值numericalvalue |
| 载体 Carrier | PP-R、PE |
| 色粉含量 Toner content | 40%-70% |
| 熔融指数 MFI(21.6KG/190°C) | 10-30g/min |
| 相溶性Intermiscibiliy | PP、PP-R |
添加比例Addition Percentage
根据客户对产品外观的需求，自行调整添加量，推荐添加2%~4%
Adjust the addition percentage according to customer requirements for products appearanceeffectThe recommend addition percentage is 2%~4%
包装&储存Package and Storage
塑料编织袋包装，每袋净重25Kq,请存放在干燥处PP woven bag,N.W 25Kg/bag.Please store in dry place
NO:11
透明色母
本系列选用ABS、亚克力等为载体树脂，适用于车尾灯专用色母粒，选用优质颜料，保持良好的化学稳定分散性好、减少受热降解，此产品通过欧盟SGS公司环保检测认证合格。
This series uses ABS, acrylic, etc. as the carrier resin, suitable for the special color masterbatchfor car tail lights. lt uses high-quality pigments which has good chemical stability and dispersityand it reduces the thermal degradation, This product has passed the EU SGS companvenvironmentalprotection inspection certification.
技术指标Technical index
| 指标Index | 数值numericalvalue | |
| 载体 Carrier | PP、ABS、亚克力 | |
| 分散性 Dispersity | 无色点、条纹 | |
| 耐热性 Heat resistance | 270-350°C | |
| 耐迁移Resistance to migration | 5级 | |
| 耐晒性 Light fastness | 8级 | |
添加比例Addition Percentage
根据客户对产品外观的需求，自行调整添加量，推荐添加1%~2%
Adjust the addition percentage according to customer requirements for products appearanceeffect.The recommend addition percentage is 1%~2%
包装&储存Package and Storage
塑料编织袋包装，每袋净重25Kq,请存放在干燥处PP woven bag,N.W 25Kg/bag.Please store in dry place
NO:12
板材、片材色母
本产品适用于以ABS、PE、PP、PC、PS、亚克力等载体原料的板材着色工艺，具有遮盖力特强，分散性好使用简单等特点，是工程塑料板材理想的专用着色母料，此产品通过欧盟SGS公司环保检测认证合格。This product is suitable for the coloring process of ABS, PE, PP PC, PS, acrylic and other carriermaterials. lt has the characteristics of strong covering power, good dispersion and simple to use. ltis an ideal special coloring masterbatch for engineering plastics. This product has passed the EUSGS environmental protection testing certification.
技术指标Technical index
| 指标Index | 数值numericalvalue |
| 载体 Carrier | PP、PE、ABS |
| 色粉含量 Toner content | 20%-70% |
| 熔融指数 MFI(21.6KG/190°C) | 10-30g/min |
| 相溶性Intermiscibiliy | PP、PE、ABS |
添加比例Addition Percentage
根据客户对产品外观的需求，自行调整添加量，推荐添加2%~4%
Adjust the addition percentage according to customer requirements for products appearanceeffect.The recommend addition percentage is 2%~4%
包装&储存Package and Storage
塑料编织袋包装，每袋净重25Kq,请存放在干燥处PP woven bag,N.W 25Kg/bag.Please store in dry place
NO:13
光扩散母粒
针对不同的树脂，选用不同有机光扩散剂为主要成分，具有高雾度和高透光率，本产品具有良好的相容性、分散性。适用于LED灯罩、光导板、广告灯箱板材、仪表罩等。
For different resins, different organic light diffuser is selected as the main component.which has high haze and high light transmittance. This product has good compatibility anodispersion. Applicable to LED lampshade, light guide plate, advertising light box plate.instrument cover, etc.
技术指标: Technicalindicators:
项目Item | 指标Indicators |
挥发份 Volatile matter | ≤0.4 |
秀光率Transmittance | ≥90% |
雾度 Haze | ≥80% |
拉伸比强度 Tensile specific strength | ≥95% |
冲击比强度Impact specific strength | ≥95% |
参考配比:1:100-1:20(用户可根据要求自行调整)
包 装:25kg/袋，(可按客户需求予以订做)。
储 存:存放于阴凉干燥处，忌爆晒，雨淋。
Reference ratio: 1:100-1:20 (users can adjust themselves according to requirements
Packing: 25kg/bag (can be customized according to customer requirements).
Storage: Store in a cool and dry place, avoid explosion and rain.
NO:14
阻燃色母粒
该产品阻止和延缓塑料制品的燃烧，具有可靠的阻燃性，性能稳定，使用方便。
The product prevents and delays the burning of plastic products, and has reliable flameretardancy,stable performance and convenient use.
技术指标: Technicalindicators:
产品型号 Product Type | 适用范围Use Area
| 使用比例Reference Ratio | 垂直燃烧Vertical TesT |
PET、PP
| PET、PP
| 3%~12%
| V-2
|
PE-F
| PE
| 10%~12%
| V-2
|
HIPS-F
| HIPS
| 20%~25%
| V-2
|
ABS-F
| ABS
| 20%~25%
| V-2
|
参考配比:1:50-1:10(用户可根据要求自行调整)
包 装:25kg/袋，(可按客户需求予以订做)。
储 存:存放于阴凉干燥处，忌爆晒，雨淋。
Reference ratio: 1:100-1:20 (users can adjust themselves according to requirements
Packing: 25kg/bag (can be customized according to customer requirements).
Storage: Store in a cool and dry place, avoid explosion and rain.
NO:15
抗静电色母粒
该产品降低塑料表面电阻，防止静电吸尘，薄膜间静电吸附等。能广泛应用于聚烯烃抗静电塑料产品中
This product reduces the surface resistance of plastics and prevents electrostatic dustcollection and electrostatic adsorption between films. lt can be widely used in polyolefinantistatic plastic products.
技术指标: Technicalindicators:
材料 | 添加比例%
| 电阻表面Q | 测试标准 |
PET
| 2%-3%
| <10 10
|
GB/T1410 |
PP
| 3%-4%
| <10 10
| |
ABS
| 5%-8%
| <10 10 | |
HIPS、PS
| 5%-8%
| <10 10 |
参考配比:1:25(用户可根据要求自行调整)
包 装:25kg/袋，(可按客户需求予以订做)。
储 存:存放于阴凉干燥处，忌爆晒，雨淋。
Reference ratio: 1:100-1:20 (users can adjust themselves according to requirements
Packing: 25kg/bag (can be customized according to customer requirements).
Storage: Store in a cool and dry place, avoid explosion and rain.
抗老化母粒:
该产品可以提高塑料制品的抗氧化性能，延长使用寿命。
Anti-aging masterbatch: This product can improve the oxidation resistance of plasticproducts and prolong the service life.
消光雾化母粒:
该产品能够使PET薄膜产生特别的雾化哑光效果，但薄膜产品仍然保留一定的透明度。
Extinction atomization masterbatch: This product can make PET film produce speciaatomization matte effect, but the film product still retains certain transparency.
红外线母粒:
本该具有隔热率高，800~2500nm红外线阻隔率可达99%以上;耐候性强，采用纯无机金属氧化物，不褪色，性能无衰减;分散性好，相容性佳，性能稳定，无析出。
Infrared masterbatch: lt should have high heat insulation rate, and the infrared barrierrate of 800 ~ 2500nm can reach more than 99%; Strong weather resistance, pureinorganic metal oxide, no fading, no attenuation of performance; Good dispersion, goodcompatibility,stable performance and no precipitation.
紫外线母粒:
本产品是将紫外线吸收剂通过纳米分散填充的方法制得，紫外吸收剂采用有机、无机纳米材料与高分子材料复合而成，有效保护产品受到紫外线长期照射产生褪色、老化等现象，延长产品使用期限
Ultraviolet Masterbatch: This product is made by the way of nano-dispersion filling otultraviolet absorbent. The ultraviolet absorbent is made of organic and inorganicnano-materials and polymer materials, which can effectively protect the product fromfading and aging caused by long-term ultraviolet irradiation and prolong the service lifeofthe product
开口爽滑母粒:
该产品分为纯开口母粒、纯爽滑母粒及开口爽滑功能兼有的母粒。该产品能提高塑料制品表面的光滑度，使重叠的薄膜表面容易打开。
Open smooth masterbatch: This product is divided into pure open masterbatch, puresmooth masterbatch and masterbatch with open smooth function. This product canimprove the smoothness of the surface of plastic products and make the overlapping filmsurface easy to open.
NO:16
其他母粒
抗老化母粒:
该产品可以提高塑料制品的抗氧化性能，延长使用寿命。
Anti-aging masterbatch: This product can improve the oxidation resistance of plasticproducts and prolong the service life.
消光雾化母粒:
该产品能够使PET薄膜产生特别的雾化哑光效果，但薄膜产品仍然保留一定的透明度。
Extinction atomization masterbatch: This product can make PET film produce speciaatomization matte effect, but the film product still retains certain transparency.
红外线母粒:
本该具有隔热率高，800~2500nm红外线阻隔率可达99%以上;耐候性强，采用纯无机金属氧化物，不褪色，性能无衰减;分散性好，相容性佳，性能稳定，无析出。
Infrared masterbatch: lt should have high heat insulation rate, and the infrared barrierrate of 800 ~ 2500nm can reach more than 99%; Strong weather resistance, pureinorganic metal oxide, no fading, no attenuation of performance; Good dispersion, goodcompatibility,stable performance and no precipitation.
紫外线母粒:
本产品是将紫外线吸收剂通过纳米分散填充的方法制得，紫外吸收剂采用有机、无机纳米材料与高分子材料复合而成，有效保护产品受到紫外线长期照射产生褪色、老化等现象，延长产品使用期限
Ultraviolet Masterbatch: This product is made by the way of nano-dispersion filling otultraviolet absorbent. The ultraviolet absorbent is made of organic and inorganicnano-materials and polymer materials, which can effectively protect the product fromfading and aging caused by long-term ultraviolet irradiation and prolong the service lifeofthe product
开口爽滑母粒:
该产品分为纯开口母粒、纯爽滑母粒及开口爽滑功能兼有的母粒。该产品能提高塑料制品表面的光滑度，使重叠的薄膜表面容易打开。
Open smooth masterbatch: This product is divided into pure open masterbatch, puresmooth masterbatch and masterbatch with open smooth function. This product canimprove the smoothness of the surface of plastic products and make the overlapping filmsurface easy to open.
